| About CCC | Admissions | Departments | Library | Schedule/Catalog |Web Advisor |Phone Directory|
Some possible careers: Nondestructive tester, ultrasonic tester, weld inspector.
Major: Nondestructive Examination Technology Level I
Certificate of Achievement 26.8-29.3 units
A Certificate of Achievement may be earned by completing all the courses required for this major with a grade of "C" or better.
An Associate in Science degree may be earned by completing a minimum of 60 units of degree credit coursework, including the major requirements and breadth requirements, with a minimum grade point average of 2.0. The student must complete all courses required for the major with a grade of "C" or better.
Courses required for the major, with suggested sequence:
1st Semester 4 units ENTEC 122 Elementary Properties of
Materials or ENTEC 222 Elementary Properties of
Materials .3 unit INTEC 90 Orientation and Procedures in Industrial
Technology .5-1 unit INTEC 91 Mathematics and Physics Refresher Course
for Industrial Technology 3 units INTEC 110 Introduction to Industrial
Technology 4 units INTEC 121 Industrial Systems and Their
Components#*^§ 1 unit INSPC 130 Visual Weld Inspection, Level 1
#^§ .5 unit NDTEC 152 Radiographic Examination, Level
I#^§ .5 unit NDTEC 154 Eddy Current Examination,Level
1#^§ 3 units NDTEC 160 Radiation Safety in Radiography
#^§ .5-2 units INTEC 114 Fundamentals of Dimensional
Metrology*^§ 2 units INTEC 115 Mechanical Drawing and Blueprint
Reading*^§ 3 units INTEC 116 Manufacturing
Processes*^§ 3 units NDTEC 150 Introduction to Nondestructive
Examination Technology .5 unit NDTEC 151 Magnetic Particle Examination,Level
I#^§ .5 unit NDTEC 153 Ultrasonic Examination, Level
I#^§ .5-1 unit NDTEC 155 Liquid Penetrant Examination,Level
I#^§
2nd Semester
# Indicates a certificate of completion is awarded to
students who successfully complete the course.
* Student should see a program adviser about taking this course.
^ This is a skills course, and the student may take the course a total of three times to master the skills. When the student demonstrates skill by passing the competency exit exam, the total number of units will be awarded.
§ Indicates that if the student can demonstrate by examination competency in the skills and/or knowledge required in the course, he need not take the course.
Major: Nondestructive Examination Technology Level II
Certificate of Achievement 28.3-31.3 units
A Certificate of Achievement may be earned by completing all the courses required for this major with a grade of "C" or better.
An Associate in Science degree may be earned by completing a minimum of 60 units of degree credit coursework, including the major requirements and breadth requirements, with a minimum grade point average of 2.0. The student must complete all courses required for the major with a grade of "C" or better.
Courses required for the major, with suggested sequence:
1st Semester 4 units ENTEC 122 Elementary Properties of
Materials or ENTEC 222 Elementary Properties of
Materials .3 unit INTEC 90 Orientation and Procedures in Industrial
Technology .5-1 unit INTEC 91 Mathematics and Physics Refresher Course
for Industrial Technology 3 units INTEC 110 Introduction to Industrial
Technology 4 units INTEC 121 Industrial Systems and Their
Components#*^§ 1 unit INSPC 130 Visual Weld Inspection, Level
1#^§ .5 unit NDTEC 152 Radiographic Examination, Level
I#^§ .5 unit NDTEC 154 Eddy Current Examination,
Level 1#^§ 3 units NDTEC 160 Radiation Safety in
Radiography#^§ .5-2 units INTEC 114 Fundamentals of Dimensional
Metrology*^§ 2 units INTEC 115 Mechanical Drawing and Blueprint
Reading*^§ 3 units INTEC 116 Manufacturing
Processes*^§ 1-1.5 units INSPC 230 Visual Weld Inspection, Level
II*^§ 3 units NDTEC 150 Introduction to Nondestructive
Examination Technology .5 unit NDTEC 151 Magnetic Particle Examination,
Level I*^§ .5 unit NDTEC 153 Ultrasonic Examination, Level
I*^§ .5-1 unit NDTEC 155 Liquid Penetrant Examination,Level
I*^§ .5 unit NDTEC 254 Eddy Current Examination,
Level II*^§
2nd Semester
# Indicates a certificate of completion is awarded to
students who successfully complete the course.
* Student should see a program adviser about taking this course.
^ This is a skills course, and the student may take the course a total of three times to master the skills. When the student demonstrates skill by passing the competency exit exam, the total number of units will be awarded.
§ Indicates that if the student can demonstrate by examination competency in the skills and/or knowledge required in the course, he need not take the course.